Ubiquiti UniFi + Home Assistant: Get the Maximum Speed Out of the Internet You’re Paying For
Most consumer Wi-Fi routers bottleneck your speed well below what enters your house, choke above 40 smart devices, and leave dead spots in the garage. Ubiquiti UniFi paired with Google Antigravity unlocks the maximum wireless speed your internet plan is capable of — plus automatic garage-to-house phone roaming you can only do with Home Assistant!
Get the Maximum Speed Out of What You’re Paying For (My 400 → 1,700 Mbps Example)
When I first installed Ubiquiti UniFi in my house, I was already paying my internet provider for multi-gig fiber capable of those speeds — yet because I was unfamiliar with Ubiquiti’s pro-grade radio menus, my phone speeds were bottlenecked around 400 Mbps.
Once I connected Home Assistant and Ubiquiti to Google Antigravity over SSH and explained in plain English that my Wi-Fi wasn’t reaching my fiber plan’s speed, Antigravity audited every access point channel width, power ratio, and switch negotiation — jumping my wireless speeds from 400 Mbps straight to 1,700 Mbps!
*Measured on a 2-Gig+ fiber ISP plan. Your max internet speed is always capped by the speed tier you pay your ISP for — proper tuning unlocks the speed already coming into your modem!
Motion-Detector Assisted Phone Roaming (Automatic Garage ↔ House Access Point Handoff)
Even on expensive Wi-Fi systems, iPhones and Androids suffer from the notorious "Sticky Client Problem": you walk out into your garage (through thick fire-rated drywall), and your phone stubbornly hangs onto 1 weak bar from a distant bedroom or living room Access Point instead of switching to the Access Point right above your head in the garage!
Your Home Assistant Garage Motion Detector triggers in 0.1 seconds — knowing with 100% physical certainty that you are standing in the garage.
Because Ubiquiti exposes live client AP sensors to Home Assistant, HA sees your phone is still clung to an Indoor Access Point.
Home Assistant tells UniFi to smoothly reconnect your phone, locking it right onto full-bars Garage Wi-Fi — and does the exact reverse when indoor motion triggers back inside the house!
Build Your Rock-Solid Ubiquiti UniFi Shopping List
Tell us about your home size and internet speed — we’ll match the exact UniFi Gateway, PoE Switch, Indoor Wi-Fi 7 APs, and Garage AP that work together out of the box.
Configured for whole-house coverage PLUS a dedicated Garage/Driveway AP for motion-assisted Home Assistant phone roaming.
Ubiquiti UniFi Cloud Gateway Max (UCG-Max, 2.5GbE)
Compact desktop powerhouse with five 2.5GbE ports and NVMe UniFi Protect camera recording.
Unlocks full 1,700+ Mbps Wi-Fi 7 speeds from 2-Gig fiber/cable ISPs without needing a 19-inch server rack.
Ubiquiti UniFi Flex 2.5G PoE / Pro Max 16 PoE Switch
2.5GbE PoE+ switching so Wi-Fi 7 access points aren’t bottlenecked at 940 Mbps.
A 1 Gbps switch caps your Wi-Fi speed below ~940 Mbps. A 2.5GbE PoE+ port is the secret ingredient that lets a phone hit 1,700+ Mbps!
2x Ubiquiti UniFi U7 Pro / U7 Pro Max Tri-Band Wi-Fi 7 AP
2.4 GHz + 5 GHz + clean 6 GHz spectrum with 2.5GbE uplink for jaw-dropping 1,700+ Mbps real-world throughput.
When tuned properly (wide 160/320 MHz 6 GHz channels + balanced 5 GHz power via Antigravity), modern iPhones and laptops fly at wired-like speeds.
Ubiquiti UniFi U6+ or U6 Mesh / U7 Outdoor (Dedicated Garage & Driveway AP)
Eliminates the insulated-wall dead zone in your garage, driveway, EV charger, and front yard.
Fire-rated drywall + foil insulation between a house and garage kills 5 GHz/6 GHz Wi-Fi. Putting a dedicated AP in the garage gives full bars in your car & workshop!
Monoprice SlimRun Cat6A 10G Snagless Patch Cables (Pack)
Certified 10Gbps pure bare copper cables for multi-gig PoE+ links between gateway, switch, Mini PC & APs.
One bad old Cat5 cable can silently drop a 2.5GbE AP link down to 100 Mbps! Pure copper Cat6A guarantees full PoE+ power and multi-gig speed.