Type any keyword (e.g. mmWave, Zooz, glass break, garage, leak, Sonos, Zigbee, fireplace) or pick a category below.
Local Garage Door Controllers, `ratgdo` / blaQ & Tilt Reminder Sensors
Open/close your garage locally in 0.1 seconds, get automatic spoken reminders if you leave the garage open, and trigger garage lights using your opener’s built-in obstruction beam!
- • YELLOW Circular Learn Button (Chamberlain / LiftMaster / Craftsman Security+ 2.0): You CANNOT just short the two wall wires with a basic relay — buy the Konnected blaQ (ratgdo technology)! It speaks digital Security+ 2.0 natively!
- • PURPLE, RED/ORANGE, GREEN Learn Button or Genie/Linear/Overhead Door: Any dry-contact smart relay (Zooz ZEN16/ZEN17 or Meross MSG200) works effortlessly across the two wall button terminals.
- • Just want Open/Closed reminders without motorized remote closing? Stick a $26 Z-Wave or Zigbee Tilt Sensor onto the top garage panel in 30 seconds!
Best-Matched Garage Door Controllers (4)
Konnected (Powered by ratgdo) — Smart Garage Door Opener blaQ (Local Security+ 2.0 ESPHome)
Wires into the same red/white/black slots on your Chamberlain/LiftMaster opener and exposes EVERYTHING locally to Home Assistant!
- Knows exact door percentage (0–100%) WITHOUT sticking any separate tilt or magnetic reed sensors on the track!
- Exposes your opener’s built-in work light AND laser obstruction beam as a free garage motion sensor!
- Can even lock out wireless RF visor remotes at night for vacation security
Setup Tip: Mounts right on top of your ceiling motor housing in 5 minutes with included short jumper wires.
Zooz — 800 Series Z-Wave Long Range MultiRelay (ZEN16 / ZEN17 — Controls up to 3 Doors!)
One $36 Z-Wave box controls up to THREE separate garage doors simultaneously with zero Wi-Fi reliance.
- Dedicated "Garage Door Mode" built right into Zooz Z-Wave parameters
- Z-Wave Long Range punches cleanly through insulated fire-rated garage walls
Setup Tip: Pair with a Zooz ZSE43 Tilt Sensor on each door so Home Assistant knows whether the door is up or down.
Meross — Smart Garage Door Opener (MSG100 / MSG200 up to 3 Doors, HomeKit Local)
Affordable all-in-one Wi-Fi kit with wired magnetic door reed sensors included in the box.
- Shows up automatically on Apple CarPlay dashboard screen as you pull into your neighborhood!
- Pairs locally into Home Assistant via HomeKit Device integration
Setup Tip: For Yellow-button Chamberlain openers, request Meross’s free clip-on accessory adapter.
Zooz — 800 Series Z-Wave Garage Door Tilt & Shock Sensor (ZSE43)
Sticks onto the top inside panel of your garage door — as soon as the panel tips horizontal, Home Assistant knows!
- Zero wiring — installs in 30 seconds for rock-solid "Garage Left Open" Sonos & phone reminders
- Also detects impact/tamper vibrations if someone tries prying the garage door
Setup Tip: Mount near the top hinge of the highest garage door panel.
Clean 2-conductor low-voltage wire for connecting ZEN16/blaQ relays cleanly to opener terminals.
Any Z-Wave, Zigbee 3.0, Matter, or ESPHome device in this category connects locally to Home Assistant!